Características
- MCU automatic processing technology is adopted to improve product stability
- Temperature sensor + smoke sensor
- Fault self-test function
- Low voltage prompt
- Automatic reset
- Infrared photoelectric sensor
- Sound and light alarm /LED indicator alarm
- SMT process manufacturing, strong stability
- Dust-proof, insect-proof, anti-white light interference design
- Relay switching signal output (normally open, normally closed optional)
Detalles
- Working power supply:
- Static current: < 10uA 12-24VDC DC (Networking type)
- Alarm temperature: 54℃~65℃
- Alarm pressure: ≥85dB/3m
- Operating temperature: -10℃ ~ +50℃
- Relative temperature: ≤90%RH
- Dimension: φ126 *36mm
- Installation height: no more than 3.5 meters above the ground (installation height beyond,
- Professional and technical personnel are required to install the smoke collecting bin equipment, the height limit is not more than 4 meters)
- Detection area: no more than 20 square meters (according to the actual area increase
- Increase the number of detectors accordingly)
- Alarm current: < 80mA
Notes
The following variables may have an impact on the products’ measured values:
- Error in temperature
- In the test environment, the stability time is too short.
- In the sun, near a heat source, or near a cold source.
- Error in humidity.
- In the test environment, the stability time is too short.
- Avoid prolonged exposure to steam, water mist, water curtains, or condensation.
- Unclean ice
- The product needs to be cleaned frequently in dusty or other contaminated environments.
Ayuda
Instalación sin herramientas opcional
Colores de carcasa personalizados
English
French
Spanish